Native American Headdress Decoration
submitted by Margo Mead
Level: Medium
Materials:
Heavy wire, 24 gauge or heavier
15 safety pins, 2 1/4 inches long
15 6mm round beads, black
15 4x6mm rondelle beads, translucent blue (these look like very small flying saucers)
31 4x6mm rondelle beads, translucent green
15 8mm faceted beads, translucent blue
15 19mm oval beads, translucent green
14 6x9mm pony beads, black
Note: Colors are merely suggestions--make yours in your favorite colors!
Instructions:
Thread the beads onto the safety pin as shown. When all safety pins are
threaded, follow the second diagram to thread wire through safety pins and
beads. Pull wire tight. Curl ends of wire to prevent the safety pins or beads
from slipping off (use pliers if needed). Curve both ends to resemble a Native
American headdress. If desired, you can add feathers dangling
down from the "front" of the headdress (the narrower end). Add another piece of
wire or a leather cord in the middle of the "back" of the headress (the wider
end) to hang the headdress from your rearview mirror or wherever.
(I didn't really design this, I just wrote down the pattern from one we found at a lodge where our Girl Scout Troop was camping. I have gotten several requests for this item, so finally it is here!)